Ventilated rainscreen cladding system with prefab panel finish

StoVerotec Facade

A lightweight rainscreen cladding system with an attractive glass panel finish. The StoVerotec Glass Panel is bespoke manufactured to meet your colour and size requirements, with RAL colour and screen-printing options available.

• The system can incorporate suitable insulation materials to meet U-Value requirements.
• StoVerotec Facade can be used as an interior decorative option.
• Lightweight system: approximately 30kg/m²
• There are no wet trade requirements, and the prefabricated panels can be quickly and easily installed.
• StoVerotec Facade has achieved National Technical Approval in Germany and is the only system where glass is adhesively fixed to a carrier board with approval in Europe. Facade heights up to 100m and soffit heights up to 20m are included in the approval.

• StoVerotec Glass Panels are bespoke manufactured, providing a wide variety of design options.
• The panels can be manufactured in any size up to a maximum of 2600 x 1250mm, either horizontally or vertically.
• RAL colour and screen-printing options available. The colour or design is applied to the rear of the panel.
• It is possible to form curved panels with a minimum radius of 500mm.
• Panel edges are normally finished flush with the carrier board, and a finished edge removes any sharp corners. For elevation edge pieces, especially corners, the carrier board can be chamfered away from the glass or set back.